LOW-FREQUENCY MICROPHONE
Tonitrum K
All the depth you've ever wanted.
A specialised microphone for capturing the depth and weight of bass drums and low-frequency sources.
£595
IN STOCK
International shipping available.
Delivery or collection options and the final checkout total are shown before payment.
Depth with definition
Developed and refined over more than three years, we are proud to announce our 'Tonitrum K' microphone. The Tonitrum K offers a hand-built, high-quality, fully tested and proven alternative to a classic concept.
A 6" driver housed in a handmade, specially adapted 8"x5" birch drum shell captures low-end frequencies from bass drums and any other low-frequency sources (bass guitar cabs, amplifiers, etc.) that you wish to capture. The signal is then processed by the integrated electronic circuitry (48 V phantom power required) before exiting via a high-quality XLR connection as a balanced DI output, ready to connect directly to any preamp or mixing console.
An integrated phantom-power status indicator illuminates red through the mesh head when 48 V phantom power is supplied.
Hear The Difference
Hear the depth and weight Tonitrum K brings to the bass drum. Compare the existing microphone setup with and without Tonitrum K, then listen to Tonitrum K on its own. Start with the bass drum example, then hear the difference within a full kit performance.
Use headphones or speakers capable of reproducing low-frequencies to hear the full comparison.
Bass drum
Switch versions while the recording plays.
Press Play to load the comparison.
Groove
Switch versions while the recording plays.
Press Play to load the comparison.
Waveforms are scaled for display only. Playback levels are unchanged.
Recording Setup
Recorded using a BAY Custom Drums kit with vertical-grain birch shells: a 10"x7" rack tom, 14"x13" and 16"x15" floor toms and a 22"x16" bass drum. The kit is paired with a 14"x6.5" 'The Sovereign' snare drum.
The bass drum microphone setup consists of an AKG D12 VR inside and a vintage AKG D12 outside. Tonitrum K can be heard blended with these microphones or on its own.
Details & Setup
Specifications
- Type: specialised low-frequency microphone
- Driver: 6"
- Shell: handmade, specially adapted 8"x5" birch drum shell
- Circuit: integrated electronic circuitry
- Output: balanced DI output
- Connection: XLR
- Power: 48 V phantom power, with integrated phantom-power status indicator (red LED)
- Polar pattern: bidirectional
- Mounting: 3/8" threaded mounting point
- Finish: black leather effect with chrome hardware
- Weight: 2.7 kg
Each unit is hand-built and individually tested by us.
Connecting & Positioning
Connect the balanced DI output to a microphone input on your mixing desk or preamp using an XLR cable, then enable 48 V phantom power.
Tonitrum K is supplied with a mini floor stand, which mounts to the incorporated 3/8" threaded mounting point. This can also be used to connect any compatible microphone stand of your choice.
For bass drums, position approximately 10-20mm from the resonant head, with the diaphragm facing the drum and the logo facing out towards the audience.
When using it with an amplifier or another source, position the diaphragm to face the sound you wish to capture.
Included in your order
- Tonitrum K microphone
- Mini floor stand
- Mini floor stand pouch
- Instructions (Quick Start Guide)
Tonitrum K fits in a standard 8" drum case (case not supplied).
Looking for a different finish?
Tonitrum K is finished in black leather effect (custom finishes are available at extra cost, subject to clients' individual requirements).
Contact us to discuss what you have in mind.
Ordering Your Tonitrum K
Delivery or collection options and the final checkout total are shown before payment. If your destination is not available, contact us before ordering.
Estimated UK and EU delivery: 3 to 5 days. Any applicable customs or import charges are payable by the customer.